Almas sewing room . Pion design step card

Step 3 fold  pop up card 

Design team project for kreativscrapping

You can find all the products here

  The sewing machine inside pops up when the card open

On the back side of the card there is pace for some tags to journal ore put a picture on

Measurements for the card

Cut on the black lines and fold on the red lines

Here is how the card look like when it is folded

All characters and paper is lined with  Zig pen and painted over with Claudine Hellmuth multi matte. Remember to dry good after lined with  Zig pen. If you do not have time to wait , Ranger heater is nice to use. This is great to dry Multi mat with, but be careful not to glue begins to "bubble

 The main panel is cut 6 x 3.5 inch. Marianne design garden bench can be glued down with multi mat. Nice and a damp cloth and wipe over with. Have used 3d foam / pop dots on multiple characters on the card

Here are some ideas to decorate the card

Glue on some paper strips to cover up he score marks and make the card more study

Pop up measurements inside the card

Cut out 2 1/4 x 1,5 inch

Scor 1/4 - 1/2 - 1 1/4 og 1 1/2

Glue together and take glue on the under and back side

 Glue the image on the front of the pop up. Cheese cloth inside the sewing mashine 

 If you want to shape the characters glue on  foil tape on the back before cut them 

Decided to decorate the back also.. Place the card on top of the paper and trace around ( Easyer to do before the card is decorated lol)

Attach the tape across and cut about 3/4 from each edge across. Tape is on and reinforce the pocket .Glue behind, but remember to not glue in the pocket. Only around the edges and the top

Hope this gives you some inspiration and ideas :-)

Thanks for stopping by :-)