Friday, February 15, 2013

Tutorial bottle box - hat - tag - Grass - tag - bottle

Here are some pictures and some measurements for the box, hat and bottle

Measurements for the top of the box

I used 1,9 mm thick chipboard, but if you cant find it you can layer 2 together



Measurements for the box
You need to measure the bottle to see how hay the box need to be


painet all the outside edges with distress stain

Cut 1 inch strips of Bazzil prismatics papers and score at 1/2 inch.
You can also use tyvek envelopes( very strong )
And glue them on one sides

Lay all the chipboard pieces side by side and glue down the hinges



Distressed the edges of the papers with distress tool

Distressed the papers

and also the hinges

Glue down the papers. If you want to attach something on the outside with eyelets then glue down the papers inside after all the outside embellishments ( did that with the steampunk bottle box)


Leave a bit open on the left side of the paper and glue down the front

Glue on the bottom piece


Glue hinges on the outside. Be sure to use a lot of glue in the Splicing as show bellow



Also paper in the bottom


Used ornament die to make the form for shelf


 Also decided to use the rest for the top of the box. You need to measure depends on how thick the chipboard you use 

Measurement for the shelf

Measurements for shelf. You need to adjust abit depends on the thickness of the chipboard you use


Glue together with hinges


Like so :-)


Sanding the edges

Glue hinges around

Distress ink the edges

Hinges on the inside to make it strong


Sand the edges of the topof the shelf


Distress the papers for shelf

Now it should look like this :-)

Find an image you want to use on the front

 Making grass
Cut a lot of thin strips from left over papers

Spray with water and curl up

 Use random with distress ink



 Making a hat

You can use oval movers and shapers die ore punch
2 different sizes and Cut a strip for the side.
Glue as show on the picture ( i used score tape)


Wet the paper a bit and roll up the sides



Glue the side on the top oval

An other oval to cover

Glue down the brim of the hat

Glue a strip of paper inside the hat to cover up the glued hinge and make it a bit stronger


Now the hat is finish to decorate

Finish hat


Used Copic and distress ink to color a yellow bottle

Tag colored with distress inks and sistress gold stain
Had not to be precise because i fussy cut it out 

One coat of Multi matte so the colour not will flout out

The i used crackle accent and glued it on a tag when it was dry


Hope this was helpful
Have fun creating :-)

XO


4 comments:

  1. Waw Anne, super gorgeous creation and great tutorial! Greetz, Els.

    ReplyDelete
  2. AMAZING as always I have to watch your videos over and over you are truly the Queen of crafting thankyou for sharing your ideas with us please don't stop xxx

    ReplyDelete
  3. Very amanzing. I saw the video on YT and I say Thank You so much Anne for this great tutorial.
    I wish you all the best and always wonderful ideas.
    Hugs
    Beate

    ReplyDelete
  4. Thank you so much for the instructions and video. Bravo, you are a very talented artist.

    ReplyDelete